top of page

Fast one hand opener -

 

Blackie Collins speed assist knives

 

One of the lessons my grandfather learned early, and passed on down to me, was the necessity for a man to have a knife on board during daily life. The knife grandpa took with him everywhere, everyday, whether in bib overalls or church suit,wasn't fancy.No super steel, no exotic handle material, no tactical leg harness, no trendy brand and certainly no 12-inch blade. It was a very simple and basic three-blade stockman folder with jigged bone slabs, and if he paid more than $1.00 for it at the hardware store 14 miles from his home, I'd be astounded.

     Even in he modern era with better steels, bigger blades, prettier handles and a wider choice of locks than were ever dreamed of not all that long ago, the primary purpose of a knife is to cut. For 90 percent (and probably more) of the personal knfe uses today, the buyer just needs a nice little folder he or she can tote along in a pocket or purse, and one that only has to get it's owner through the trials and tribulations of everyday life. For the vast majority, this isn't for hacking through the jungles of Borneo, felling trees to build emergency log cabins along the trail, skinning a dozen buffalo,splintering ammunition crates, reducing logs to firewood,repelling a charging grizzly, or defeding against a masked guy with a bloody chainsaw in the woods. It's the much more mundane things like farm or ranch chores, warehouse work, office activites, and so on. Nothing glamorous-just everyday applications where a sharp edge beats teeth, and scissors are not pratical to carry in the pocket..​

    Given the basic idea, does a decent working knife have to have the price of $300. on the box? No. Taking inflation and other factors into consideration, $25.00 today would be roughly the equivalent of a $1. knife 50 years ago..., and I'd argue that there is a place in this day and age for a $25.00 knife. It's even possible to get a bonus feature included for the money.

Colonial Quick Flicks

The Colonial knife Corp's Quick Flick line may interest you if you should happen to be on the lockout for a working folder. Besides some of the familiar and popular features found through mid-sized folder knifedom in general, such as open construction, flat scales, pocket clips and thumb-studded blades, all three of the Quick Flick models also use an assisted-opening "Action"

    Neither a side-swinging switchblade nor a front-popper, an assisted-action blade requires the user to get things moving by starting the blade out manually on opening, not by pushing a button or sliding switch", after which the spring takes over and "flicks" the blade the rest of the way open to it's locking position.While this can be a fun and showy way to impress people at family get-togethers, its' actually a useful feature when you either have only one hand avaialbe to get the blade into use or need it in a hurry. ALL three Quick Flicks operate the same general way and all re priced at $25.00

 

$25.00 WELL SPENT

Looking at the broad picture, these knives are a good buy for that hard earned $25.00 layout. No, 440A isn't ATS-34, but it's still stainless. You won't feel any sticker shockor buyers remorse, and you're not going to worry about making it ess "pretty" if you have to use it hard. Will it hold an edge? Sure. How long? That depends entirely on you and what you do with it.Use it a little, indefinitely; use it lot, and you should learn how to sharpen a blade if you don't know how already. I didn't do any testing-to destruction on any of the three, but I can tell you the 7005 cuts stiff hemp rope just fine, the 7002 slices up packaged beef strips quite well for my quick and easy Ramen trail spaghetti recipe, and the 7001 opened up a couple deliveries of straped cardboard ammuntion boxes every bit as well as 154CM would have.

    Qualiy levels are nothing short of excellent, equal to many folders priced four or five times as high. The fit and finish between scales and liners is first class, the action open smoothly, the blades are centered when closed, they show no wobble or play either closed or open, and the handles can be tightened by the user if they do start to loosen a bit over time.The grinds are clean, even and consistent, and all three clearly illustrate that the originating company's specs and quality control expectations on cutting tools are at least as important in considering a purchase as the country of origin on imported models.

   Many of us have high-dollar knives that we're proud of. No matter how proud we may be of a $400 work of cutlery art, it's not the one that goes to work in the corral, on the dock, in the shipping/receiving room, up the cliff face or along the hiking trail. What does get the job done, everyday, all across America, is the equivalent of Grandps's $1 pocketknife. Ding it up-who cares? Dull it-sharpen it. Lose it-you can afford to replace it. This is Colonial's market for these Quick Flicks, and the assited opening feature is a bonus. 

 

 

 

 

QUICK FLICK 7005

Starting with the newest model for 2011, the 7005 is a 4-ounce liner lock on my scale, with a 3.25-inch blade (from handle to tip), like the other two models, the 7005 uses 440A stainless steel and has Rockwell hardness of 58-60. This blade has a matte gray finish and is lighly hollow-ground, with 1 1/8" of serrations on the 3 1/16" cutting edge and an inch of jimping on the spine.

Blade-wise, it can be jump-started by either using the conventional ambidextrous thumb stud or by pushing inward with an index finger on the double-duty guard "tab" where it protudes from between the steel liners in the handle section. Handle-wise, the 4.5" slabs are checkered G10, with an outer black layer and an inner contrasting green layer. The 7005 can be totally diassembled for cleanng if necessry by removing its stainless screws, and its open construction allows for routine maintenance with pipe cleaners and oil. Scale edges are nicely rounded, as are the full steel liners (nop hand scraping), there's a lanyard hol at the rear, and the pocket clip can be changed from tip-up-leftside carry to tip-down- rightside carry.

e for you to tell a story and let your users know a little more about you.​

By Denis Prisbrey, Tactical Knives magazine

 QUICK FLICK 7001 "Tucks"

Also a 2010 introduction, the smallest of the three, the 7001 Tuckerman Ravine, or "Tucks".​model (named after an area of New Hampshire's Mount Washington, the highest peak in the Northeastern U.S. and very wel-known among skiers, hikers, ice climbers, and general winter mountaineers) tips the scaleat 2.5 ounces, and its 2 5/8" blade and 3.75 inch handle make for very light and comfortable carry.It has no serrations nor a guard for opening, but the thumbstud is still there and the hollow-ground matte gray blade does have three quarters of an inch jimping on its spine above a 2 3/8" cutting edge, with the indentical hardness in heat treaing

  This model has G-10 scales, this time a black-checkered outside layer over an olvie drab inside layernext to the steel liners.Like the other two, the 7001 can be disassembled, its' liner lock engages positivelyand it includes a lanyard hole. The brushedstainless steel clip comes set for tip-up left side carry and can be swapped to right-side tipdown carry. The scales and liner edges arer also well rounded, makng this a comfortable little knife in the pocket

 

PayPal ButtonPayPal Button
PayPal ButtonPayPal Button

$25.00.

$25.00

Tucks knife-

A.K.A. Tuckerman Ravine knife,

Perched on the Southeastern side of Mt. Washington is Tuckerman Ravine. Skiers, hikers, ice climbers and general winter mountaineers along with Botanists are big fans of Tuckerman Ravine, a deep gully on New Hampshire's Mount Washington. Surveyor Bradford Washburn called Tuckerman Ravine a "Flawless Example" of a glacial cirque.

"Tucks" as the ravine is often called is infamous for its avalanches and falling ice. Each year over a 1000 tons of ice form on the head wall. In the spring the ice comes down often in pieces larger than cars. It is prudent to check in with one of the local visitor centers to determine avalanche conditions before starting up into the ravine.

Mount Washington has claimed more lives than Everest! Be careful.

 

Model 7002

Introduced last year, the 7002 is a bit smaller, with a 440A blade measuring 1 3/8" from the 4.25 inch handle, and a cutting ege of 2 5/8". The ideal is "subdued" here, with dark digital, camo-finished smooth aircraft alminum scales, black screws, black pocket clip and blackened blade. No Jimping, but the hollow-ground 7002 offers that same 1 1/8" of edgeserrations and 58-60 Rockwell hardness. The guard tab doesn't stand as high above the liners, but it's still perfectly accessible. The handle's edges are well rounded and the contours are very comfortable in the hand. The 3.75 ounce 002 is also fullyuser-serviceable if you have small enough diver bits. The handle has a lanyard hole, and removable clip comes installed for right-side tip down carry and can be moved for left side-tip-up carry

$25.00

PayPal ButtonPayPal Button
bottom of page